Great Advice For Using Hex Head Bolts

Hex head bolts are used for many different things because of their exceptional durability. If you plan on using some, following this protocol can ensure this special type of fastener works out perfectly.

Lubricate Bolts Periodically

If you need to remove hex head bolts from a particular material and you're struggling, it's important to be very careful. Being too forceful could cause you to damage the threads and then the bolts may not work that great anymore. 

You can actually use lubrication if you're having a tough time removing hex head bolts from materials. The lubrication will create extra movement and that may be enough to get the hex head bolt completely out. Lubrication can also help with inserting hex head bolts in certain materials. Getting the bolts into place will be a much more convenient process as friction is reduced.

Clean Insertion Point

To make absolutely sure you have a smooth time getting hex head bolts through their insertion points, make sure you thoroughly clean the inside portions. This won't be a challenge if you use pressurized air. You can force air inside the insertion point for a quick and easy clean. 

Dirt and other debris will blow right out and that primes the insertion point for the hex head bolts going in them. As long as you're thorough and use enough compressed air, getting hex head bolts into place won't be that much of a challenge.

Used Rated Torque

Once you have hex head bolts into place, you'll need to tighten them. However, it's important that you're careful when doing so. Too much pressure could cause you to damage the bolts' threading and the material that they're going into.

So that this doesn't ever happen, read up on the recommended torque for the hex head bolts you purchased. It should say what this tightening torque is in the bolt's production description or you can just ask the manufacturer.

Once you have this figure, you'll know exactly how much pressure to apply with whatever device you're using on the hex head bolts. That will result in optimal tightening results that you can trust. 

There are a ton of applications of hex head bolts, but if you want them to work out for your particular operations, you need to know how to work with them from the beginning. There is an abundance of resources and guides to help you learn integral details about this special type of fastening hardware.  

For more information on hex head bolts, contact a supplier.

About Me

Putting Data To Work For You

Manufacturing may be an industry as old as human civilization, but advanced technology drives modern production practices. From automation to supply chain analysis, technology impacts every aspect of the manufacturing industry. Two of the latest fronts in this expanding technological field are the internet of things and big data. By using advanced sensors to collect more data from the factory floor, companies can streamline their production processes, reduce waste, and improve their bottom lines. It's not always easy to stay on top of these new technologies, of course, and that's why we're here. We'll share our knowledge with you so that you can put these exciting new processes to work at your company. Keep reading to discover how these innovative techniques can improve your day-to-day business operations.

Search

Latest Posts

22 March 2023
As a business owner, you know the importance of having the right equipment to get the job done. If you work in the aerospace industry, you may need to

20 December 2022
One of the most important things to have with custom metal fabrication is confidence. It helps you manipulate tools in a refined way, whether you plan

27 September 2022
No matter what you're trying to assemble, your choice of fasteners will directly contribute to the success and ultimate stability of the final product